Water Meter Idler/Spacer Tube for FULL 3/4" Size Meter PVC, 9" long, w/Gaskets

Description

Water Meter Idler Tube
Spacer Tube
For Full 3/4" Size Water Meter
This Idler tube can be used for two major purposes, New Construction or meter replacement. It is the same thread size and lay length as a water meter.
New Construction:
Used to properly space meter couplings or valves when the water meter is not yet available.
Light weight PVC is easier to use for initial plumbing in of meter couplings than a heavy brass water meter
Can be used to plumb for a future water meter to be installed at a later date while allowing water and the place for the meter.
Meter Replacement
A meter idler tube can be used to supply water temporarily if a meter is removed for repair or testing
Can be used for flat rate billing when plumbing is done in anticipation of a future utility or submetering water meter being installed.
Note: May not fit in setters that have a support ear on the swivel nut. See photos
Specs:
For proper spacing of a Full 3/4" water meter meeting AWWA specification (USA/Canada)
Fits FULL 3/4" Meters with standard 9" lay length
(for short body 3/4" thread x 7.5" length meters, see listing for 5/8 x 3/4 size idler)
Lay Length 9"
Fits couplings with AWWA 3/4" Water Meter Threads (Approx 3/4" I.D. and 1-1/4" O.D.).
Material PVC Plastic - exterior painted gold
NSF approved materials for drinking water
Includes:
1 - Spacer tube, 9" long with threaded ends for 3/4" water meter
2 - 3/4" Rubber Water Meter Gaskets
Note: For 5/8" x 1/2" meters or 5/8" x  3/4" meters , see our other listings