Roto Form Roto Trim 272 Lead Trimmer

Description

Roto Form Roto Trim 272 Lead Trimmer
Comes with what you see in the pictures. If you don't see it, you probably won't get it.
Specifications are from Roto Form and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
This unit has been tested to function and is guaranteed to work.
The Unit's Serial Number Tag Reads:
Model Number:
272
Serial Number:
1110
Power Requirements:
115 VAC, 5 Amp Fuse, Single Phase, 60 Hz
Features:
The world’s most popular printed circuit board lead trimmer
Easy trimming around SMD, connectors, et.al.
Over 4,000 machines sold around the world
Board sizes from the very smallest up to 12" x any length.
Specifications:
Board Size:
Up to 12" wide, by any length.
Lead Material:
Cutters will trim copper, steel and kovar.
Maximum Component Height:
3.20"
Recommended Cutting Height:
.025" to .050".
Set-Up Time:
Takes only a few seconds using the stury, spring-loaded, vise jaw rails.
Speed:
Up to 10,000 RPM will cut up to 2500 leads per minute depending on the material and diameter of the leads.
Accuracy:
The Roto-Trim, as designed, operates within a ±.003" accuracy across its length and width.
Safety Features:
Both hands are used. Each hand activates a safety switch. Horizontal shield with skirt protector protects the operator. Safety glasses should also be used. A 25 W lamp illuminates the cutting area providing increased visibility.
Cutty Blades:
Specially blended tungsten carbide provides long life. Cutters may be sharpened several times.
Selective Cutting:
The high visibility design of the Roto-Trim provides the operator the convenient ability to selectively trim around devices, connectors, mounting hardware, etc.
Inspection:
The illuminated design permits easy inspection of the cut leads.
Electrical:
Power Requirements:
120 VAC, 6 A, 50/60 Hz
Motor:
Wound armature, wound stator brush motor - sleeve bearings - oil impregnated oilite bronze.
Fused:
250 V, 5 Amp
Speed Control:
Solid state continuous control
Light:
25 watt
Safety Switch:
Based mounted, handle mounted.
Mechanical:
Dimensions, Basic Overall Unit:
24" x 11-1/2" x 16-1/2" H
Weight:
50 lbs.
Materials:
Base:
Milled/Anodized Aluminum Plate 5/8" thick.
Upright Post:
1.0" plated steel.
Arms:
Solid anodized aluminum stock.
Housing:
Cold rolled steel with enamel finish.
Vise Jaw Rails:
Anodized extruded aluminum.
Safety Shield:
Scratchproof polycarbonate type material.
Cutters:
Diamond-grounded blended tungsten carbide brazed onto 1/4" diameter stainless steel shank. Various sizes from 3/4" to 2" diameter (from the factory)
Bearings:
Thrust needle roller, sealed roller and ball bearings.
For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a .00 minimum for packaging, handling, and order processing. International shipping to be determined by destination.
Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.:
(1) Are you the end-user of this item?
(2) If you are not the ultimate end-user of the item, please state the ultimate end user's name.
(3) What is the ultimate country destination?
06/20/18