-40%

REPAIR KIT FOR VIZIO IR SENSOR BOARD# 3637-0022-0189 (0171-1671-0892)

$ 6.85

Availability: 35 in stock
  • Brand: VIZIO
  • MPN: 3637-0022-0189
  • Type: IR SENSOR KIT
  • Compatible Brand: For Vizio
  • Condition: New

    Description

    This Repair Kit is directed to people with basic knowledge in electronics.
    M-tronicz TV Repair is offering this repair kit for a common failure in Vizio 3637-0022-0189 (0171-1671-0892) IR Boards:
    TV DOES NOT RESPOND TO REMOTE BUT WORKS WITH MANUAL BUTTONS
    Known Models
    JVC
    JLE32BC3001
    JLE37BC3001
    JLE42BC3001
    JLE42BC3500
    JLE47BC3001
    JLE47BC3500
    VIZIO
    E3D420VX
    E3D470VX
    M3D650SV
    M3D651SV
    M420SV
    M470SV
    M550SV
    *******************************************************************************************************************************
    Because not all of the boards fail in the same way, we do not guarantee that the components in this kit
    is all you need to fix your board but it can take care  90% off all cases.
    It's your responsibility to troubleshoot and properly diagnose your board in order to complete the repair.
    It is important to note that the above described behavior can be caused by a number of very different
    failures and not all of them could be related to this repair kit !
    We recommend all kits fitted by a qualified personnel.
    A successful repair depends on the own skill and fault finding ability.
    This service kit is intended for use by persons having electrical, electronic
    and mechanical experience and knowledge at level generally considered
    acceptable in the consumer electronics and appliance repair trade.
    DOING YOUR OWN REPAIR WORK: The removal and replacement/installation of electronic components
    at the circuit board level is NOT recommended if you are not experienced with electronic
    component and circuit board repair. If you are new to this stuff, please take our advice
    and leave the work to a qualified expert- you will most likely thank yourself later.
    It is VERY easy to cause damage to electrical parts and circuit boards
    if repairs are not done with precision, neatness, and accuracy. It is very easy for
    one to make problems WORSE than they were before, if one does not know what one is doing,
    or does not have adequate experience with these kinds of parts and this kind of work in general.