Prompter People FLEX-D-19 Teleprompter

Description

This system has been very lightly used, almost no marks on it at all. (see very small marks on mirror surface, quite difficult to photograph and to see). I am the owner and operator from new.
This unit includes :
Cabling - HDMI, VGA, and Thunderbolt/Mini-display port ends
19" viewing screen for talent
Polishing cloth
Contour Design Shuttle-Xpress NLE Multimedia Controller
Remote for operation of viewing screen
Printed cheat sheet for prompter moves
Baseplate with 2 positions for small cameras
This system is currently set so that small cameras can be mounted onto the same support piece as the prompter hardware. Prompter People have additional brackets for independently supporting the prompter away from the camera support (an approach required for larger, ENG type cameras). I used the system primarily with Canon EOS C300's, and you can see it here on the most recent CBS network live shoot, with a C300 MkII. It's a nice system, and if I had future work in the pipeline, I would enjoy keeping it around.
To get the best out of this system, I recommend building it quietly on a 'cold set' and getting in touch with the Prompter People about possible customizations, etc, for your particular setup. It makes quite a difference to get the system dialed in around your anticipated workflow and camera setup.
It is currently set in a zippered nylon case. I'm going to pack that case into cardboard. Take note that this nylon case does not have rigid sides and would not be the one to use for flying. It worked fine for around-town work, where I could manage how roughly it was being handled. All internal components are individually wrapped for this sale.
I have prompter software available on a thumb drive, and will have that available also, if you are interested in taking ownership.