MADDALENA CD SD PLUSSINGLE JET WATER METER - 20 Pieces. 3/4 size. Made in Italy

Description

MADDALENA CD SD PLUSSINGLE JET WATER METER - DRY DIAL. 3/4 size. comes with reed switch. Made in Italy. Condition is New.  20 pieces. Free Shipping worldwide.
https://www.maddalena.it/en/products/water/cd-sd-plus/10
CD SD PLUS is a Super Dry single jet water meter. CD SD PLUS utilizes a magnetically driven dry dial design
and is suitable for use with either cold (T50) or hot (T30/T90) water. The impeller is the only part in contact with the water,
thus ensuring readability with scaling water or with water containing small debris or sand particles.
CD SD PLUS water meters comply with Directive 2014/32/EU (Annex MI-001) and have undergone conformity assessment
procedure B+D. The maximum measuring range Q3/Q1 (R) certified is 100 for horizontal position and 50 for vertical position.
CD SD PLUS meters also come pre-equipped to retrofit a pulse emitter. The pulse emitter may be fitted maintaining the
meter’s standard features and without affecting readability.
CD SD PLUS water meters are certified for use with potable water in accordance with Italian and international regulations.
Specifications
• Meters comply with Directive 2014/32/EU (Annex MI-001) (1)
• Hot forged brass body
• Dual pivot for balanced impeller rotation under any flow rate and installation conditions. Pivots are made of non-magnetic, AISI 316 stainless steel
• Inlet strainer with wide straining area
• Protection against external magnetic fields
• Internal adjustment device
• Internal components are made of anhygroscopic, anti-scaling and hard-wearing resistant plastic materials
• Nominal pressure (PN): 16 bar
• Installation: horizontal or vertical No upstream and downstream straight pipe requirements
• Maximum water temperature: 50 °C or 90 °C
• The serial number is marked on the dial both in numbers and in bar code format (2)
• Water meters also come pre-equipped to retrofit a pulse emitter (3)
• Hydraulic tests are carried out at three flow rates (Q1, Q2, Q3) on 100% of the production. Our testing benches comply with ISO 4064/3 and ISO 4185 (EN 14154/3) Standards.