Hearing Aid Tube Puller DIY Hearing Aid Earmold Tube Replacement tool

Description

Hearing Aid Tube Puller DIY Hearing Aid Earmold Tube Replacement tool
Hearing Aid Tube Puller DIY Hearing Aid Earmold Tube Replacement tool
Hearing aid earmold tubing, BTE tube threater tool
Hearing Aid Tube Puller
Your hearing aid tubes should be clear, soft and pliable.
Old tubing can be a source of discomfort and pain.
If your tubes are yellowed and stiff or hard, they need to be replaced.
Re-tubing your own earmolds will save you time and money.
Tube puller for ear-mold tube replacements.
Do-It Yourself Hearing Aid Tube Replacement tool.
Packet includes 1 Hearing aid tube puller
This earmould tube threader has a red handle and is used to re-thread an earmold with new tubing.
How to use it
Cut the old tube flush with the outside of the earpiece.
From the canal tip, insert a tube threader tool into the earpiece. Place the quilled end of the tube through the loop of the tube threader and pull through the earpiece. (Figure 1)
When the tube is all the way through, adjust the tube by hand until you have it at the proper angle. (Figure 2)
Pull the tubing away from one side of the sound bore and apply a small amount of glue. Capillary action will cause the glue to flow around the entire tube. (Figure 3)
When the glue is dry, cut the tube flush with the end of the canal. You are now ready to re-attach the earmold to the hearing instrument. (Figure 4)
Listing and template services provided by inkFrog