DAE MJ-100n 1" NTEP NSF61 Lead Free Potable Water Meter, Pulse Output + Coupling

Description

DAE MJ-100n 1" NTEP NSF61 Lead Free Potable Water Meter, Pulse Output + Coupling
I purchased this meter brand new and then delayed installing in past the free 30 day return window only to find out the meter can only be mounted in the horizontal position. Therefore this meter is basically brand new and works like new as long as it is mounted horizontally as the manufacturer says below. All of the specs for this water meter can be found below:
Model MJ-100
Type 1” Lead-Free Potable Water Meter with Pulse Output/Reed Switch, NSF61 + Couplings, Multi-Jet, Turbine Type
Pulse Output 1 gallon/pulse, a dry contact (i.e. no voltage) reed switch with 2 wires, 1.5m. The switch may be damaged if input electricity is more than 0.01A, 24V. We shall not be responsible with the result if connecting to third party device which is not certified by DAE.
Unit US Gallon
Max temperature 122˚F (50˚C)
Max. Working Pressure 232 psi, exceeding the requirement from AWWA standard 150 psi
Meter Body Lead-Free Bronze
Size Length without couplings: 10.24 inches Length with couplings: 15.12 inches Item dimension: 10.24" length, 3.86" wide, 4.63" height
Bore Diameter 1.14 inches (19.56 mm)
Weight 6 lbs.
Pressure Drop 0.145 psi @ 5 GPM, 1.38 psi @ 15 GPM, 3.48 psi @ 25 GPM
NSF61 DAE MJ series water meter is NSF61. CA, VT, MD, LA require all the drinking water meters be NSF61 to meet their stringent regulation.
Horizontal Inline mount with dial facing upwards. For installing vertically with water flowing upwards, please refer to DAE PD-100 (B08D7356MY), which can be able to be installed in any position, vertically or horizontally, dial facing upwards or downwards or horizontally, water flowing downwards or upwards. Not for use of pit application. For outdoor use, please refer to DAE MJ-100c, PD-100.
Certified by NSF to meet ANSI/NSF 61 for material safety and ANSI/NSF 372 for lead free plumbing as defined by the US Safe Drinking Water Act. Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website.
Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go.
Ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also use with DAE AMR130 (Auto Meter Reading Module for single water meter) and AMR (for 16 water meters) for remote reading (5th picture).
Accuracy: +/-1.5% within normal flow rate range as per AWWA Standard. Conforms to AWWA C708, for clean water. Safe Maximum Flow Rate: 50 GPM, Recommended Maximum Continuous Flow Rate: 25 GPM, Minimum Test Flow Rate: 0.75 GPM Normal Test Flow Limits: 3-50 GPM