Brass Water Meter Adapter install 5/8 x 3/4 x 7.5" meter to 3/4 x 9" Setter, A23

Description

A12 Water Meter Size
Adapter
Install 5/8" x 3/4" or 3/4" x 7.5" meter in a 3/4" x 9" setter
Extends 7.5" meter lay length to fit 9" setter lay length
To maximize revenue and meter accuracy, you should always use the smallest size meter that will handle the flow rates required of the building tenant. These adapters allow easy downsizing of meters without re-plumbing the meter setting.
For installing a 5/8" x 3/4" or a 3/4" short (7.5" lay length) into a full 3/4" meter 9" meter setting. Does not change thread diameter, only extends lay length by 1.5". One adapter required per setting. can be used on the inlet or outlet side of the 7.5" lay length meter.
A. Allows Downsizing an existing 9" lay length full 3/4" meter to a new 5/8" x 3/4" meter extended with this adapter. Changes a 5/8" x 3/4" meter with 7.5" lay length to 9" lay length.
B. Allows installing a 3/4" Short body 7.5" long meter  to be installed in a setter space for a standard full size 9" lay length meter.
Lead-Free Brass
One end has 3/4" AWWA Male Meter Threads
One end has 3/4" AWWA Female Meter Threads
Overall length 2", 1.5" length when threaded onto meter
Extends 7.5" long meter to 9" long (without change of thread size)
Includes 1 internal composite gasket
One Adapter Required per meter
To Use:
Remove Old Meter - 3/4" x 9"
Install New Meter - 5/8" x 3/4" meter with this adapter installed on ONE end.
No change necessary to meter setter or plumbing.
Cross References: Ford Meter Box # A23 or A23-NL, Trumbull 368-0639, AY MacDonald 710J23
Note: This does NOT fit a 5/8" x 1/2" meter. however, Using A12 adapters (available in other listings) to up-size a 5/8" meter threads from 1/2"  to 3/4" will allow this adapter to extend the 3/4" lay length. from 7.5" to 9".